Customer Reviews For The First Alert Onelink Hardwired Wi-Fi Smoke & Carbon Monoxide Alarm - 1036469

Overall Rating

9 Reviews
9 customers recommend this product
Brenda Ramsey
January 4, 2019
Verified Purchase

Easy installation and online management.

Gregory Cote
November 22, 2018
Verified Purchase
Great product

The product is great, but can be a little confusing setting up. I would still recommend this product.

James Olivi
October 17, 2018
Verified Purchase
It Worked as Advertised

It worked as advertised, was easy to install and easy to add to Apple Homekit. It is interconnected with 5 BRK # 9120LBLs

Jim Dunlea
May 20, 2018
Verified Purchase
Works well

I didn't have much of a problem with installation. I didn't get it to connect to wifi the first time, but that may have been my fault.

William Erskine
May 4, 2018
Verified Purchase
Great only? choice for HomeKit homes

I replaced my 3 existing hardwired smoke detectors since they were 14 years old with these. Thanks to the short adapter cables provided with the units, it was an easy plug-n-play install that took just a few minutes. I recommend wearing ear protection for initial setup and testing. I also waited until my wife had taken the kids for a walk. All 3 units worked as smoke/CO detectors when first powered up. One unit failed to connect to HomeKit on the first try, but after resetting the alarm 5 presses of the button it connected on the second try. I like the way the all the alarms announce the issue smoke/CO and its location. I also like the adjustable brightness of the nightlight, eliminating the need to install a nightlight in a dark hallway. In the Home app you'll see each unit as two sensors one smoke, one CO in whatever room you assigned each. I may decide to move them into their own HomeKit room to reduce the clutter of some of my fuller room displays. Note, the alarm location announcement is chosen independently of the assigned HomeKit room.

Mark Rebmann
March 21, 2018
Verified Purchase
Re: Excellent Product

Very easy to install and works great.. Love the nightlight and Home kit functionality..

Josh Karr
January 10, 2018
Verified Purchase
Continue to be happy

This is my third Onelink unit and I've been very happy with it. The setup is easy but I did have to try twice to get it set up completely. Still didn't take long and has been working great ever since.

Arthur Price
June 1, 2016
no problems so far

I installed two of these to replace older wired in alarms I had. Last week I also purchased two of the DC battery only units for two rooms that previously did not have alarms so no wiring. All alarms communicate well together. Hopefully these will last the full 10 years.

Jason Lintner
February 25, 2016
Verified Purchase
Thank You.

Thank You for making this. We live where no one would be able to tell that something was wrong at our house if we were not home. We have a pellet stove and pets and when not at home you just never know when something could malfunction. This security allows us to have the peace of mind that in the event of an emergency we would be notified on our iphone to come home, call a friend, or call 911 for help. Thanks again.

What are the basic iphone and system settings needed for this product?
iPhone 5s and above, iPad 3 and above, iPod Touch 5G and up with iOS9. Your ipone should have WiFi and Bluetooth turned On. Wifi Router running on 2.4 GHz range. If you use iCloud, you must also turn on Key Chain.
I just purchased a Onelink alarm, but it isn't connected to the Internet. What do I do?
If your alarm hasn't been added to a Onelink Account, follow these instructions to add it:

Download the Onelink app. Choose the Onelink product you purchased. Follow the instructions in the app to install and set-up
Why might I keep geting a message that states "Pairing Failed"?
Verify you are either scanning or entering in the correct pairing code. If you cannot get the unit to Pair via Bluetooth force close the app. IF YOU ARE USING iCloud YOU MUST ALSO TURN ON Apple Key Chain in your Settings. Then swipe away the Onelink Home App and start again after the pushing the alarm terst button 5 times to reset the alarm. Retry the pairing process now from the beginning.
How can I interact with Siri?
Siri utterances are now available!You can interact with Siri using the following commands:
- How is my CO Detector?
- How is my Smoke detector?
- Do I have a smoke detector?
- Is the smoke alarm tripped?
- Is the CO alarm tripped?
- How is the Carbon Monoxide detector?
- Change the brightness on my smoke detector to [x] percent.
Where should I install my First Alert Onelink combination Smoke and Carbon Monoxide alarms?
Minimum coverage for Smoke Alarms, as recommended by the National Fire Protection Association (NFPA), is one Smoke Alarm on every floor, in every sleeping area, and in every bedroom (See "Regulatory Information For Smoke Alarms" for details on the NFPA recommendations). For CO Alarms, the National Fire Protection Association (NFPA) recommends that a CO Alarm should be centrally located outside of each separate sleeping area in the immediate vicinity of the bedrooms. For added protection, install additional CO Alarms in each separate bedroom, and on every level of your home.
What are the benefits of having wireless interconnect?
When one Onelink alarm goes off all wirelessly connected Onelink alarms will sound as one. The Onelink alarm will also talk to you, letting you know what type of danger (smoke or CO) and where the danger is located.
What is the benefit having a First Alert Onelink combination Smoke and Carbon Monoxide alarm?
There are many benefits of having the Onelink Combination Smoke and Carbon Monoxide alarm. One reason being is the fact that it helps protect for the lifespan of 10 years against both deadly threats in one unit. This alarm has sensing technology that works actively to help better protect you and your loved ones. It also contains the wireless interconnect feature which allows you to connect each of your First Alert Onelink alarms so when one alarm sounds, they all will sound. When seconds count in an emergency it provides an audible indication of the possible threatened area and more importantly what area to investigate or to avoid. Another benefit of this product is that it contains Bluetooth and Wi-Fi connection so you can be connected to your home even if you are away.

Onelink Hardwired Wi-Fi Smoke & Carbon Monoxide Alarm

The HomeKit-enabled Onelink by First Alert Wi-Fi Smoke + Carbon Monoxide Alarm and the free Onelink Home app on your iPhone or iPad work for your peace of mind, so you know your home is safer and truly just one link away. This alarm will detect and alert you in the event of a Smoke or Carbon Monoxide emergency. With the Onelink by First Alert Wi-Fi Smoke+Carbon Monoxide Alarm you can forget about battery replacements because this alarm doesn't need them. This alarm was designed to last for 10 years, the longest time permitted by the National Fire Code. This product is intended for non-professional do it yourself installation. If you would like information about a professionally installed and monitored system, please contact First Alert Professional. First Alert Professional is not affiliated with BRK Brands, Inc.

First Alert Onelink Hardwired Wi-Fi Smoke & Carbon Monoxide Alarm AC10-500

Write A Review For Model # 1036469

Please enter your name!
Will be displayed on the comment.
Please provide valid email address!
Used for verification only.
Please choose rating!
Please enter a title for your review!
Please write a review!
Your review must be at least 25 characters.
Your review has been submitted, thank you for taking the time to write a review!

Products On Sale

0 $0.00