Customer Reviews For The First Alert WirelessTalking Battery Operated Smoke & Carbon Monoxide Alarm - 2pk

Overall Rating

5
50 Reviews
5
48
4
2
3
0
2
0
1
0
50 customers recommend this product
Joseph Pococke
February 3, 2015
Verified Purchase
Updating Old CO alarms

Did exactly like DVD instructed, put one in basement and another in upstairs hallway. Could not ask for anything better. Family sleeps well at night.

kimberly  farkas
October 23, 2014
Verified Purchase

LOVE the way they can communicate between themselves

E David Ladd
October 10, 2014
Verified Purchase
Must have for CPAP users

Purchased 3 sets six units to place through out the house. Sleeping with a CPAP makes a single distant alarm or basement alarm difficult to hear or to cause a wake up. Now, if any alarm is triggered, all alarms sound and announce where the danger is. Also make testing easier, test only one and see if all are sounding. Perfect for upgrading older homes where the new codes require wired alarms.

George Clark
June 30, 2014
Verified Purchase
Smoke & CO Alarm

Great product easy o program and install

Melanie Chase
November 23, 2013
Verified Purchase
Great product

Easy to install and good informational video

gary mastny
July 2, 2013
Verified Purchase
great product

The product operated great and was very easy to link up with the other smoke detectors I purchased from First Alart.

Walter Hewitt
April 30, 2013
Verified Purchase
Fire or Carbon Monoxide - Dead is dead!

Id just as soon not die from either fire or carbon monoxide! Having both in one unit is great - especially since they all communicate with each other AND tell me where the problem is on my way out of the house! I really hope I wont need these - but if the unthinkable happens, I feel that my wife and I will be able to get out in time! Thank you for a great product!

Art Kibby
March 1, 2013
Verified Purchase

These sound an alarm just fine, and communicate with the others, but the pre-programmed words dont do us much good since were not using them in a home, but in a theater.

Howard Barshop
January 26, 2013
Verified Purchase
These combo units are great, just pricey.

These combo units are great for single family homes. They are easy to install ut they are very pricey.

Richard Rosario
October 15, 2012
Verified Purchase
Great Alarms

These did exactly what they said they would and i have a classic home with 3 floors with the old plaster walls with wire mesh and the signals work perfectly.

Ricky Grisel
February 19, 2012
Verified Purchase

Very pleased with the product.

Harry Ballsack
January 30, 2012
Wow what a system

This is a great system! It installed easily and works like a charm. I I could only get my wife to quit farting as easily

James Dunkel
January 26, 2012
Verified Purchase
Intergrated System

I just updated teh entire Smoke, Carbon Monoxide and Heat garage alarm system in my 90 year old house. Part of the total system is hard wired and part is not. The One Link system enabled me to have an intergrated system and provide a higher level of warning. I am very happy with the system. It is very important to watch the video on how to link the products.

Daniel Weber
January 15, 2012
Verified Purchase
Working fine now

A few days after installing these we had a false smoke alarm in the middle of the night. A few days after that, they started talking but we were not near them and couldnt understand what they were saying. We had gotten an RMA to return them and were just about to pack them up when they spoke again, telling us that one of the units had a sensor fault. First Alerts customer service was first rate through this entire process and they sent me a replacement immediately after I told them about the sensor fault. Both units have been working fine for over a month and we are very happy with them.

wgc
December 30, 2011
Verified Purchase

Like all First Alert products user friendly,with clear concise programing instructions.

courtney neff
December 5, 2011
Verified Purchase

Simple to install. Great concept of smoke and CO which communicate with each other.

William Gabbey
December 5, 2011
Verified Purchase

Excellent use of current technology to enhance home safety allows updating smoke and CO2 protection without having to tear up and rewire the whole house

James Munger
December 1, 2011
Verified Purchase

Prompt service and great product

David Doerr
November 28, 2011
Verified Purchase
All Good

Item was received in a timely manner in excellent condition.

Justin  Slate
November 17, 2011
Verified Purchase

Perfect upgrade to protect my family against fire and carbon monoxide. Installation was a breeze.

What is a mesh network and how do the First Alert Wireless Interconnect smoke detectors intercommunicate?
First Alert Wireless Interconnect smoke alarms operate on a "mesh network" to integrate smoke alarms for better safety and response in an emergency. All of the First Alert Wireless Interconnect alarms send, receive and resend the initiating alarm's signal. Why is this important? Let's say the signal is blocked from reaching the master bedroom alarm either by distance or some obstruction in the home. With First Alert Wireless Interconnect, the mesh network of alarms re-routes and re-sends the signal via the other alarms, providing a greater chance all alarms will receive the signal. The "mesh network" is a more reliable means of wireless communication.
What is the proper placement of smoke alarms?
It is important that you have the proper placement for your smoke alarms. Install your alarms at least 20 feet from appliances like furnaces and ovens, which produce combustion particles. Alarms should be at least 10 feet from high humidity areas like showers and laundry rooms, and at least 3 feet from heat/AC vents. Be sure to install a smoke alarm in each bedroom, one at the top of each stairwell, and one on every level.
My smoke alarm keeps chirping and beeping. Why does my smoke alarm chirp intermittently?
It is likely that the reason your smoke alarm keeps chirping and beeping is that the battery is low. Whenever your smoke alarm keeps chirping, replace the battery immediately.

Other reasons include: It could be a different device or appliance such as a security system, monitor, carbon monoxide alarm, or other device which has a similar low battery or alert signal. Some of the same factors that cause unwanted alarms can cause intermittent alarms: dust and insects in the alarm or power interruptions in hardwired alarms. Improper wiring on AC or AC/DC smoke alarms. AC alarms will chirp every 5 seconds if the interconnect wire is grounded. The orange interconnect wire should NEVER be grounded; it should only be used to interconnect other smoke alarms or compatible devices.

Why doesn't my smoke alarm sound when I push the test button?
It is important that you frequently test your smoke alarms. When you are testing your smoke alarm, there are a number of reasons why the alarm might not sound:
  • You may not be holding the test button down long enough. Try holding it down for up to 10 seconds (20 seconds on photoelectric models) .
  • Your battery may not be installed properly or snapped all the way in place. Even if the alarm sounded briefly when the battery touched the terminals, you still need to make sure it is snapped securely in place. If the battery is loose, in cannot power the smoke alarm properly. After installing new batteries, be sure to test your smoke detector.
  • Your AC power may not be on. AC and AC/DC units will have a power indicator light (red or green) that shines continuously when they are receiving electrical power.
  • If you have a 10-Year model, the smoke alarm may not have been properly activated. If the tab broke away before the alarm was activated, you can use a toothpick to move the switch over to test the alarm.
Why does my smoke alarm go off when I install a battery or turn on the AC power?
It is normal for smoke alarms to go off and sound briefly (up to 5-10 seconds) when you install a new battery or when they are powered up. If the alarm continues to go off and no smoke is present, the cause may be one of the following:
  • There may be insufficient battery power, try new batteries.
  • Problems with voltage or insufficient electrical power (brown out) may cause a continuous weak sounding alarm. For AC or AC/DC models, temporarily disconnect power at the service panel until the brown out is over. If you do not restore the AC power, your smoke alarms cannot warn you of a fire.
  • Incompatible warning device. If an incompatible alarm or auxiliary device is linked into a series of AC or AC/DC smoke alarms it may cause the system inadvertently go off.
My smoke alarm keeps chirping, even with a new battery. What is causing this?
There are a number of possible causes for your smoke alarm to keep chirping even with a new battery.
  • It is possible that your smoke alarm "silence" button was pushed by mistake. The alarm will now "chirp" once a minute for up to 15 minutes before resetting.
  • Are you sure it's the smoke alarm? Funny to ask, but other devices have similar low battery chirps or warning tones.
  • Your "new" batteries may not be fresh. If batteries are stored, especially in cold areas like refrigerators, they lose their charge more quickly. Always check the freshness date on the package when buying new batteries. Keep plenty of replacement batteries on hand so that you are sure to always be protected by your smoke alarms.
I lost my First Alert smoke alarm owner's manual. How can I get a new one?
First Alert smoke alarm owner's manuals are available online for download at no cost. Find your alarm in our Smoke Alarms section.
Why does the National Fire Protection Association (NFPA) recommend that home smoke alarms be replaced after 10 years?
Smoke alarms have a limited life. Although each smoke alarm and all of its parts have passed many stringent tests and are designed to be as reliable as possible, any of these parts could fail over time. Therefore, you must test the devices weekly. The unit should be replaced immediately if it is not operating properly. The performance of smoke alarms older than 10 years is simply not reliable. To ensure your family's safety, all carbon monoxide and smoke/CO combination alarms need to be replaced every 5-7 years. All smoke alarms need to be replaced every 10 years.

If it's time to replace your alarms, consider the NEW 10-Year Life series and never have to worry about a battery replacement for the life of the alarm.10-Year alarms are available in smoke, carbon monoxide and combination alarms.

How do I get my carbon monoxide alarm to stop chirping?
If your carbon monoxide alarm keeps chirping, the battery may be low or weak. On First Alert carbon monoxide detectors, check to see if the battery light is yellow or green. If the alarm is chirping and the light is yellow, it means the battery is low. The way to get a carbon monoxide alarm to stop chirping is to replace the battery.
Where should I install carbon monoxide alarms? What is proper carbon monoxide alarm placement?
It is very important to install carbon monoxide alarms near or in each separate sleeping area. Many states now require that a carbon monoxide alarm is placed in each bedroom. For added protection, placement of an additional carbon monoxide alarm at least 15-20 feet away from the furnace or fuel burning heat sources is recommended. Also, install carbon monoxide alarms at least 10 feet from sources of humidity like bathrooms and showers. In two story houses, install one carbon monoxide alarm on each level of the home. If you have a basement, carbon monoxide alarm placement is recommended at the top of the basement stairs.
Is there anywhere I shouldn't install carbon monoxide alarms?
Do not install carbon monoxide alarms in garages, kitchens, furnace rooms, or in any extremely dusty, dirty, humid, or greasy areas. Do not install alarms in direct sunlight, or areas subjected to temperature extremes. These include unconditioned crawl spaces, unfinished attics, un-insulated or poorly insulated ceilings, and porches. Carbon monoxide alarms should not be installed in outlets covered by curtains or other obstructions. Do not install in turbulent air-near ceiling fans, heat vents, air conditioners, fresh air returns, or open windows. Blowing air may prevent carbon monoxide from reaching the CO sensors.
How many carbon monoxide alarms should I have in my home?
So how many carbon monoxide alarms should you have in your home? The National Fire Protection Association (NFPA) recommends that you should have a carbon monoxide alarm centrally located outside of each separate sleeping area in the immediate vicinity of the bedroom. For added protection, you should have additional carbon monoxide alarms in each separate bedroom and on every level of your house, including the basement. Some states now require that you have a carbon monoxide alarm in each bedroom of the house. If you install only one carbon monoxide alarm in your home, place it near or in your bedroom.
What is the proper way to do a carbon monoxide alarm test?
The following procedure is the proper way to do a carbon monoxide alarm test - Press and hold the Test Button on the front of the alarm until the alarm sounds. Be sure you hold the button down long enough; it can take up to 20 seconds for the alarm to respond to the test.
Is it a false alarm when my carbon monoxide alarm sounds and there doesn't seem to be a problem?
A carbon monoxide alarm false alarm should not occur if your alarm is in working order. Remember, carbon monoxide is an odorless, colorless gas. If your carbon monoxide alarm went off, it detected potentially harmful amounts of carbon monoxide. After the professionals have evaluated the situation, make sure no one has any symptoms of carbon monoxide poisoning.

Here are a few situations that may cause a carbon monoxide alarm "false alarm:"
  • The carbon monoxide alarm needs to be relocated. Carbon monoxide alarms should be located 15-20 feet away from all fossil fuel burning sources like furnaces and stoves. Alarms should be located 10 feet away from sources of humidity like showers.
  • Fossil fuel burning appliances may not be burning fuel completely. Check pilot lights/flames for blue color. Appearance of yellow or orange flames indicates incomplete combustion-a source of carbon monoxide.
Will carbon monoxide alarms detect explosive gas leaks?
No, a single function carbon monoxide alarm reacts to carbon monoxide only. To detect explosive gas, you need an explosive gas detector. Different kinds of explosive gas can be detected and it is recommended that any home that utilizes natural or propane gas have at least one explosive gas leak detector.
I'm ready to change my alarm battery - what replacement batteries can I use?
Check your User's Manual or the nameplate on the back of the alarm. Different smoke detectors & CO alarms use different kinds of batteries - 9V, AA, AAA - it all depends on the particular model you have. Use quality batteries like lithium batteries - having plenty of power is worth any extra cost. Never use rechargeable batteries because they may not always provide a consistent charge.

First Alert Wireless Interconnect Talking Battery Operated Smoke & CO Alarm


First Alert's series of Wireless Interconnect Talking Battery Operated Smoke & CO Alarms effectively eliminate the need for a wired connection and operate entirely on batteries. The latest advancement in a series celebrated for its intuitive use of technology, the First Alert Wireless Interconnect collection offers an abundance of options when it comes to creating the ideal safety network. Wireless inter-connectivity allows you to connect up to 16 First Alert Wireless Interconnect alarms within your home! Voice can easily be programmed for the alarm's location within your home. (this feature comes with 11 pre-programmed choices) Voice also notifies which hazard is being detected. If the alarm set in your kitchen senses smoke, all of your First Alert Wireless Interconnect alarms will announce: 'Warning, evacuate! Smoke in the Kitchen!' This feature allows for the maximum in whole home protection.

First Alert Wireless Interconnect Talking Battery Operated Smoke & CO Alarms utilize an Electrochemical Sensor that allows for optimal efficiency in detecting carbon monoxide. The realization of Photoelectric Smoke Sensing Technology will effectively reduce the number of nuisance alarms triggered by cooking smoke and shower steam. This alarm comes equipped with a Mute Button that serves the dual purpose of quickly silencing your alarm as well as testing its function. The combination of an End of Life Timer and an increased emphasis on the unit's 85db sound output establish peace of mind, while the inclusion of Dual Smoke and Carbon Monoxide Sensing all but guarantee the safest of experiences. This alarm carries a 5 year limited warranty and complies with UL217 and UL2034 Standards.

This Wireless Interconnect alarm is for you if:
  • You want to build a safety network of interconnected alarms in your home without the cost and hassle of wiring.
  • You want the earliest notification of where the danger is in your home.
Where To Place Smoke Alarms: One in every bedroom, and at least one on every level of the home.>

Where To Place Carbon Monoxide Alarms: One on every level of the home and one in each sleeping area.

This product is intended for non-professional do it yourself installation. If you would like information about a professionally installed and monitored system, please contact First Alert Professional at 1-800-921-6025. First Alert Professional is not affiliated with BRK Brands, Inc.

Write A Review For Model # SCO501B2

Please enter your name!
Will be displayed on the comment.
Please provide valid email address!
Used for verification only.
Please choose rating!
Please enter a title for your review!
Please write a review!
Your review must be at least 25 characters.
Your review has been submitted, thank you for taking the time to write a review!

Products In This Category

0 $0.00
Top