Combination Explosive Gas and Carbon Monoxide Alarm with Backlit Digital Display
First Alert GCO1CN Combination Explosive Gas and Carbon Monoxide Alarm with Backlit Digital Display. Featuring a backlit digital display, this explosive gas and CO detector plugs into any AC outlet with no additional mounting hardware needed.
Detects Dangerous Levels of CO and Explosive Gases
Designed to promote peace of mind and household safety, the GCO1CN Combination Explosive Gas and Carbon Monoxide Alarm accurately senses the presence of methane and propane. It also features an advanced electrochemical CO sensor that detects carbon monoxide leaks from a variety of sources, such as faulty fuel-burning appliances, blocked chimneys, and cars left running in the garage. When the alarm detects a threat, it alerts you with a loud 85-decibel alarm.
Backlit Display for Reviewing Readings
Equipped with a backlit digital display, the GCO1CN Combination Explosive Gas and Carbon Monoxide Alarm takes the hassle out of monitoring CO and explosive gas levels in your home. The display gives you a clear readout of current and peak levels, allowing you to discern patterns that indicate potential leaks from an appliance, a generator, or other source.
Plugs into Any AC Outlet for Effortless Setup
This alarm is easy to set up and doesn't require any wiring or the help of an electrician. The compact, low-profile unit plugs cleanly into an AC wall outlet without obstructing other sockets and comes with a line cord for versatile placement options. The alarm also features a 9-volt backup battery to help ensure continued operation in the event of a power outage. A pivoting, easy-to-access battery drawer allows you to replace the battery without dismounting the alarm.
Easy to Operate and Test
For added convenience, the alarm can be configured to work with almost any standard household remote control (not included), so you can remotely silence false alarms. A one-touch silence/test button makes it easy to test the detector or mute it during a false alarm. And thanks to the end-of-life timer, you can know exactly when it is time to replace your alarm.
First Alert Combination Explosive Gas and Carbon Monoxide Alarm GCO1CN
- 3-way protection, 3 threats sensed in 1 alarm: carbon monoxide, propane gas and natural/methane gas.
- Plug & protect, alarm plugs into any standard 120v ac outlet. Line cord allows for high mounting to sense methane, low mounting for propane.
- EZ view backlit digital display, easy viewing of danger levels, current, and peak co levels in your home.
- Battery backup, provides consistent protection for added safety during power outages.
- Mute button silences unnecessary alarms immediately. It also tests alarm functions with same button.
- EZ access battery door, front-open compartment allows easy battery change without dismounting alarm.
- Low battery signal mute, quiets low battery signal for up to 8 hours.
- Electrochemical sensor, most accurate technology available for detecting carbon monoxide* *compared to other common sensing technologies.
- End of life timer, alarm chirps when it is time to replace it.
- 9v battery included.
- Loud 85db alarm.
- Meets UL1484 & UL2034 standards.
- Emits T3 Pattern.
- 5 Year Limited Warranty, carbon monoxide alarms should be replaced every 5 years for maximum protection.
- Product Dimensions (LxWxH): 5.6 x 1.8 x 3.1 in.
- Product Weight: .9 lbs.
Q: How do I get my carbon monoxide alarm to stop chirping?
A: If your carbon monoxide alarm keeps chirping, the battery may be low or weak. On First Alert carbon monoxide detectors, check to see if the battery light is yellow or green. If the alarm is chirping and the light is yellow, it means the battery is low. The way to get a carbon monoxide alarm to stop chirping is to replace the battery.
Q: Where should I install carbon monoxide alarms? What is proper carbon monoxide alarm placement?
A: It is very important to install carbon monoxide alarms near or in each separate sleeping area. Many states now require that a carbon monoxide alarm is placed in each bedroom. For added protection, placement of an additional carbon monoxide alarm at least 15-20 feet away from the furnace or fuel burning heat sources is recommended. Also, install carbon monoxide alarms at least 10 feet from sources of humidity like bathrooms and showers. In two story houses, install one carbon monoxide alarm on each level of the home. If you have a basement, carbon monoxide alarm placement is recommended at the top of the basement stairs.
Q: Is there anywhere I shouldn't install carbon monoxide alarms?
A: Do not install carbon monoxide alarms in garages, kitchens, furnace rooms, or in any extremely dusty, dirty, humid, or greasy areas. Do not install alarms in direct sunlight, or areas subjected to temperature extremes. These include unconditioned crawl spaces, unfinished attics, un-insulated or poorly insulated ceilings, and porches. Carbon monoxide alarms should not be installed in outlets covered by curtains or other obstructions. Do not install in turbulent air-near ceiling fans, heat vents, air conditioners, fresh air returns, or open windows. Blowing air may prevent carbon monoxide from reaching the CO sensors.
Q: How many carbon monoxide alarms should I have in my home?
A: So how many carbon monoxide alarms should you have in your home? The National Fire Protection Association (NFPA) recommends that you should have a carbon monoxide alarm centrally located outside of each separate sleeping area in the immediate vicinity of the bedroom. For added protection, you should have additional carbon monoxide alarms in each separate bedroom and on every level of your house, including the basement. Some states now require that you have a carbon monoxide alarm in each bedroom of the house. If you install only one carbon monoxide alarm in your home, place it near or in your bedroom.
Q: What is the proper way to do a carbon monoxide alarm test?
A: The following procedure is the proper way to do a carbon monoxide alarm test - Press and hold the Test Button on the front of the alarm until the alarm sounds. Be sure you hold the button down long enough; it can take up to 20 seconds for the alarm to respond to the test.
Q: Is it a false alarm when my carbon monoxide alarm sounds and there doesn't seem to be a problem?
A carbon monoxide alarm false alarm should not occur if your alarm is in working order. Remember, carbon monoxide is an odorless, colorless gas. If your carbon monoxide alarm went off, it detected potentially harmful amounts of carbon monoxide. After the professionals have evaluated the situation, make sure no one has any symptoms of carbon monoxide poisoning.
Here are a few situations that may cause a carbon monoxide alarm "false alarm:"
The carbon monoxide alarm needs to be relocated. Carbon monoxide alarms should be located 15-20 feet away from all fossil fuel burning sources like furnaces and stoves. Alarms should be located 10 feet away from sources of humidity like showers.
Fossil fuel burning appliances may not be burning fuel completely. Check pilot lights/flames for blue color. Appearance of yellow or orange flames indicates incomplete combustion-a source of carbon monoxide.